This manual contains critical information regarding electrical and mechanical installation and safety information which you should know before starting installation.
CAUTIONS REGARDING INSTALLATION OF GRACE SOLAR
> Stop work during stormy weather. Solar modules can be caught in the wind, causing you to fall.
> Never step or sit on the glass surface of a solar panel. The glass may break, resulting in shock or bodily injury. The module may also stop generating power
> Always use the supplied parts to attach the solar modules and mounts. Use of weaker parts, such as screws that are too short, is dangerous and may cause the solar modules or mounts to fall.
> Always use the specified tools, The solar modules or mounts may fall if the installation is not strong enough, for example when parts are not tightened sufficiently.
> Do not modify or cut parts. Doing so dangerous. safety cannot be guaranteed.
> Product should be installed and maintained by qualified personal. Keep unauthorised personnel away from solar modules.
Installation steps
* Determine the position of leg in the beginning.
* The distance between each leg pair L1 equals to the lengt of Supporting Pipe
* Installation of the angle iron onto the legs.
* Put Supporting Pipe onto the front leg/rear leg, Fixed it with U-bolts.
* Firstly put rails on the supporting pipe.
* Note: the position of the rails.
* Installation of the splice to connect multiple rails together. Slide the splice on the rear side of the pre-assembled rails. Fasten the first bolt firmly. Then slide the next rail into the splice.
* Installation of the rails. Fix the rail with U bolt kit.
* Install all the rails onto the supporting pipe.
* Place the first module of the bottom row. Slide the end clamp tightly against the module and fasten it. Install the and clamp and mid clamps.
* The edge of solar panel to the rail distance: 25mm-30mm:
* Installation of the clamps.
* Slide the next module against the installed module. Fasten the mid clamp. Install other modules and clamps in this way. Keep module even.
* Install all the panels. Finished.
CAUTIONS REGARDING INSTALLATION OF GRACE SOLAR
> Stop work during stormy weather. Solar modules can be caught in the wind, causing you to fall.
> Never step or sit on the glass surface of a solar panel. The glass may break, resulting in shock or bodily injury. The module may also stop generating power
> Always use the supplied parts to attach the solar modules and mounts. Use of weaker parts, such as screws that are too short, is dangerous and may cause the solar modules or mounts to fall.
> Always use the specified tools, The solar modules or mounts may fall if the installation is not strong enough, for example when parts are not tightened sufficiently.
> Do not modify or cut parts. Doing so dangerous. safety cannot be guaranteed.
> Product should be installed and maintained by qualified personal. Keep unauthorised personnel away from solar modules.
Installation steps
* Determine the position of leg in the beginning.
* The distance between each leg pair L1 equals to the lengt of Supporting Pipe
* Installation of the angle iron onto the legs.
* Put Supporting Pipe onto the front leg/rear leg, Fixed it with U-bolts.
* Firstly put rails on the supporting pipe.
* Note: the position of the rails.
* Installation of the splice to connect multiple rails together. Slide the splice on the rear side of the pre-assembled rails. Fasten the first bolt firmly. Then slide the next rail into the splice.
* Installation of the rails. Fix the rail with U bolt kit.
* Install all the rails onto the supporting pipe.
* Place the first module of the bottom row. Slide the end clamp tightly against the module and fasten it. Install the and clamp and mid clamps.
* The edge of solar panel to the rail distance: 25mm-30mm:
* Installation of the clamps.
* Slide the next module against the installed module. Fasten the mid clamp. Install other modules and clamps in this way. Keep module even.
* Install all the panels. Finished.